Sell or Auction Your Apollo 16 Flown Heat Shield in Lucite for up to Over $10,000 or More at Nate D. Sanders Auctions
FREE VALUATION. To buy, auction, sell or consign your Apollo 16 Flown Heat Shield in Lucite that is for sale, please email your description and photos to [email protected] of Nate D. Sanders Auctions (http://www.NateDSanders.com).
Sell Your Apollo 16 Flown Heat Shield in Lucite
Apollo 16 (April 16–27, 1972) was the tenth crewed mission in the United States Apollo space program, administered by NASA, and the fifth and next-to-last to land on the Moon. It was the second of Apollo’s “J missions”, with an extended stay on the lunar surface, a focus on science, and the use of the Lunar Roving Vehicle (LRV). The landing and exploration were in the Descartes Highlands, a site chosen because some scientists expected it to be an area formed by volcanic action, though this proved to not be the case.
Below is a recent realized price for an Apollo 16 Flown Heat Shield in Lucite. We at Nate D. Sanders Auctions can obtain up to this amount or more for you:
Apollo 16 Flown Heat Shield in Lucite. Sold for over $10,000.
Nate D. Sanders Auctions has sold the following space memorabilia:
Apollo 8 Flown Heat Shield Segment, Comprising a Charred Plug from the First Manned Mission to Orbit the Moon
Very rare heat shield segment flown on the historic Apollo mission, not only the first manned mission to leave Earth’s low orbit and summit to the moon, but also the first manned mission of the Saturn V rocket. Segment is a charred plug, here preserved in lucite on a wooden base, with a plaque reading “First Manned Lunar Orbital Flight / Apollo 8 / Dec. 21-27, 1968″. Measures 4″ x 5.5″ x 3.125”. Very good plus condition. Very rare, with only one other recent example found at auction. Sold for $18,370.
Rare Apollo 13 flown heat shield plug encased in a circular piece of lucite and engraved in black along bottom, ”Apollo 13 / April 11-17, 1970”. Heat shield plugs are made of incredibly lightweight fiberglass ‘honeycomb’ which is hand-filled with an ablative resin material by air gun in order to limit high heat exposure during re-entry. The crew endured incredible circumstances after launching 11 April 1970, when two days later, they were forced into an emergency turn-around before ever reaching the moon. Fortunately the astronauts expertly improvised a repair to the spacecraft and narrowly escaped disaster, ultimately returning safely to Earth. Plug measures 1.5” in diameter with ”37” engraved to bottom; lucite casing measures 3”. Near fine. With an LOA from Jack Swigert’s sister.
Sold for $3,750.
Apollo 13 Flown Heat Shield Plug — A Piece Which Endured Incredible Circumstances During the Famous Mission
Rare Apollo 13 flown heat shield plug encased in a circular piece of lucite and engraved in black along bottom, ”Apollo 13 / April 11-17, 1970”. Heat shield plugs are made of incredibly lightweight fiberglass ‘honeycomb’ which is hand-filled with an ablative resin material by air gun in order to limit high heat exposure during re-entry. The crew endured incredible circumstances after launching 11 April 1970, when two days later, they were forced into an emergency turn-around before ever reaching the moon. Fortunately the astronauts expertly improvised a repair to the spacecraft and narrowly escaped disaster, ultimately returning safely to Earth. Plug measures 1.5” in diameter with ”44” engraved to bottom; lucite casing measures 3”. Near fine. With an LOA from Jack Swigert’s sister.
Sold for $3,750.
Apollo 13 flown heat shield plug, encased in a circular piece of lucite and engraved in black along bottom, ”Apollo 13 / April 11-17, 1970”. Heat shield plugs are made of a lightweight fiberglass ”honeycomb”, which is hand-filled with an ablative resin material in order to limit heat exposure during re-entry. The crew endured incredible circumstances after launching 11 April 1970, when two days later, they were forced into an emergency turn-around before ever reaching the moon. Fortunately the astronauts expertly improvised a repair to the spacecraft and narrowly escaped disaster, ultimately returning safely to Earth. Plug measures 1.5” in diameter with ”12” engraved to bottom; lucite casing measures 3”. Near fine. With an LOA from Jack Swigert’s sister.
Sold for $3,750.
The Apollo 15 Hand Controller From Al Worden
As Al Worden, the Apollo 15 Command Module Pilot, puts it in the signed COA included with this hand controller, which is mounted on wood: “…this control stick cover, NASA serial number MSC 991-0001.12, was the hand controller I used during the flight of Apollo 15. The function of the hand controller was to adjust the attitude of the spacecraft during flight. For instance it was critical to the maneuver designed to withdraw the Lunar Module from the S-IVB stage of the launch vehicle once leaving earth orbit. This maneuver involved 180 degree rotation of the Command and Service Module to align with the Lunar Module in storage. It was also essential for the alignment of the spacecraft in the proper direction for any thrusting maneuver. This controller was essential to the success of Apollo 15 and has been in my possession since the flight.” In near fine condition. Sold for $72,556.
Exceptionally Scarce Apollo 11 Flag Flown to the Moon — Signed by Armstrong, Aldrin & Collins
United States flag flown to the moon on Apollo 11 during the historic 1969 mission. Flag is mounted to an official NASA certificate reading: ”This flag traveled to the Moon with Apollo 11, the first manned lunar landing, July 20, 1969.” Certificate is signed ”Neil Armstrong”, ”Michael Collins” and ”Buzz Aldrin” in felt tip and has the Apollo 11 crew emblem near the center. Printed along the bottom edge are the first words by Neil Armstrong after stepping upon the moon: ”One small step for man, one giant leap for mankind”. The silk United States flag measures 6” x 4”, mounted to the NASA certificate, which measures 10” x 12”. Some show through of adhesive to flag corners and light toning to certificate, else near fine. Sold for $63,195.
Jack Swigert’s Own Apollo 17 Flown Robbins Medal, Serial Number 41
Apollo 17 Robbins medal, serial number 41. Sterling silver medal commemorates Apollo 17 as the most recent lunar landing conducted by NASA to date. The mission launched 7 December 1972 and returned safely twelve days later. Pictorial obverse is cast with mission insignia, featuring stylized design elements of the U.S. flag and an eagle, alongside a bust in profile of Greek god Apollo. Figures are set against a detailed space ground featuring the moon and ringed planets. Scene is circumscribed by title, ”Apollo XVII / Cernan-Evans-Schmitt”. Reverse reads, ”Launch / Dec. 6, 1972 / Taurus-Littrow / Dec. 11, 1972 / Entry / Dec. 19, 1972”, circumscribed, ”America – Challenger / Apollo XVII The Beginning”. Coin measures 1.25” and is made of sterling silver, housed in its original ”Robbins Company” plastic box with an ”41” sticker on the bottom. Fine. With an LOA from Apollo 13 astronaut Jack Swigert’s sister. Sold for $56,250.
American flag flown aboard the historic Apollo 11 mission to the moon. Printed 4” x 6” fabric flag accompanied the astronauts on Apollo 11 in their successful landing on the moon that historic 20 July 1969 day. Flag is affixed to an official NASA certificate with the Apollo 11 insignia and reading: ”This flag traveled to the moon with Apollo 11, the first manned lunar landing, July 20, 1969”. Hand-signed in felt pen, ”Neil Armstrong”, ”Michael Collins” and ”Buzz Aldrin”. Certificate measures 9.5” x 11.5” and is framed to an overall size of 15” x 17”. Some minor show-through of glue from verso of flag in four spots and minor toning to certificate, else near fine. A scarce memento from the historic mission. Sold for $47,652.
FREE VALUATION. To buy, auction, sell or consign your Apollo 16 Flown Heat Shield in Lucite that is for sale, please email your description and photos of your Apollo 16 Flown Heat Shield in Lucite to [email protected] of Nate D. Sanders Auctions (http://www.NateDSanders.com).